Home » DIY Encyclopedia » Hardware & Fasteners » Utility Hardware » Shelf Standard

Shelf Standard

  • Pre-slotted metal strips attached to the wall, preferably into wall studs.
  • Can be attached with toggle bolts or similar fasteners approximately 16” apart.
  • If the standards are further than 16” apart, the shelves may not support heavy loads.
  • A newer variation includes a mounting rail that is fastened across the studs. The standard then clips directly into the rail or may require an adapter. Usually requires a fastener at the bottom for stability.
 

Related FAQs

  1. Are the shelf support brackets used on RTA furniture all the same size?
  2. Do I need all of those special wrenches? Can't I just use a standard wrench or a pair of adjustable pliers?
  3. Can I cut vinyl with a standard utility knife?
  4. I had shelf support brackets that bent because there was too much weight on it. Are there stronger ones?
  5. Can I plug my air conditioner into any standard outlet?
  6. What is the difference between a standard sheet of plastic and a landscape fabric?

DIY Encyclopedia

  1. Shelf Bracket
  2. Standard Showerhead
  3. Paint Pail Shelf
  4. Standard Slotted-Tip Screwdriver
  5. Standard Toilet
  6. Power Driver Fastener
 

Project Finder

  1. Garage Storage and Organization
  2. How to Hang Pictures
 
 

Comments (0)